How To Configure My Alarm Panel For WIFI

Honeywell Lyric Controller (LCP500-L)

  • From the Home screen, press Security
  • Press Tools
  • Enter your Master Code
  • Press WIFI Config
  • Press Scan Access Points
  • When your network appears select it then press Edit
  • Press Key and enter your WIFI password (case sensitive)
  • Press Save
  • Press Join.  WIFI icon should no longer have ! in it
  • Press Home to exit
Honeywell Lyric Controller

Honeywell Lynx Touch L7000

  • From the Home screen, press Security
  • Select More
  • Press Tools
  • Enter your Master Code
  • Press WIFI Config
  • Press Scan Access Points then Scan
  • When your network appears select it then press Edit
  • Press Key and enter your WIFI password (case sensitive)
  • Press Done
  • Press Join
  • When “Device has been successfully added to the network” press OK
  • Press Home to exit

Honeywell Lynx Touch L5210

  • From the Home screen, press Security
  • Select More
  • Press Tools
  • Enter your Master Code
  • Press WIFI Config
  • Press Scan Access Points then Scan
  • When your network appears select it then press Edit
  • Press Key and enter your WIFI password (case sensitive)
  • Press Done
  • Press Join
  • When “Device has been successfully added to the network” press OK
  • Press Home to exit
Honeywell Lynx Touch L5210 Wireless Alarm System

Qolsys IQ Panel 2 / 2+

  • From the Home screen swipe down (or hit small grey bar at top of the screen)
  • Select Settings
  • Select Advanced Settings
  • Enter your Master Code
  • Press WI-FI
  • Press Scan Access Points then Scan
  • When your network appears select it then enter your WIFI password (case sensitive)
  • Press Connect
  • Press Home to exit
Qolsys-IQ-Panel-2

Alula Connect+ (Helix)

  • Press and hold the Enroll/WPS button on the Connect+ until it beeps twice (roughly 10 seconds)
  • Press the WPS button on your router to join