Honeywell Keypad Programming

Installer Code

This special code is used to get into the programming section of your alarm system.  It allows you to add or delete sensors and zones, change entry/exit delay times, and if using landline for monitoring allows you to change the phone numbers and account number for a central station.  In almost all cases having a valid Installer Code will be required when switching alarm dealers.

In some systems such as Honeywell resetting the Installer Code is easy to do without modifying any of the other system configuration programming.  But in others there is either no way to reset this important code or the entire system must be factory defaulted (erased) to reset the Installer Code back to its default.  We always recommend leaving the system Installer Code at its default value.  However many dealers will change the Installer Code to keep customers out of programming but more importantly because it locks you to that dealer for monitoring.

 

Below you will find instructions for how to test if your Installer Code is valid.  If you don’t know what the Installer Code is set to you can start with the default Installer Code for this system which is also shown.

 

Honeywell Vista 10P, 15P, 20P, 21iP, SafeWatch Pro 3000 Hardwired Panels

Default Installer Codes to try: 4112, 6321, 4140

To test if your Installer Code is valid

  • From your keypad enter [Installer Code] + 800.  4112 is the default code.  
  • If correct “20” or “Installer Code” will display.  If nothing then the code entered is incorrect and changed by a dealer.
  • If correct enter *99 to exit Program Mode.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code on a Vista panel

Honeywell Lynx Touch L5210 Wireless Alarm System

Honeywell LynxTouch L5210, L7000

Default Installer Codes to try: 4112, 6321

To test if your Installer Code is valid

  • From your keypad press Security, More, Tools, then enter your Installer Code above
  • If correct Program will display as a menu item.  If nothing then the code entered is incorrect and changed by a dealer.
  • If correct press the Home button to exit Program Mode.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code on a Vista panel

Honeywell Lyric Controller Wireless Alarm System

Honeywell Lyric Controller

Default Installer Codes to try: 4112, 6321

To test if your Installer Code is valid

  • From your keypad press Security, Tools, then enter your Installer Code above
  • If correct Program will display as a menu item.  If nothing then the code entered is incorrect and changed by a dealer.
  • If correct press the Home button to exit Program Mode.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code on a Vista panel

  • There is no reset for the Installer Code on a Lyric panel.  You will need to get a valid code from the last dealer or replace the panel which may need the help of a local dealer to reprogram the new panel.
Honeywell PROA7PLUS Kit1 3 doors-Windows, Motion

Honeywell ProA7, ProA7Plus

Default Installer Codes to try: 4112, 6321

To test if your Installer Code is valid

  • From your keypad press the Menu button (three lines) at the center bottom of screen.
  • Scroll down and select Tools
  • Enter your Installer Code from above
  • If correct Program will display as a menu item.  If nothing then the code entered is incorrect and changed by a dealer.
  • If correct press the Back Arrow button to exit Program Mode.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code on a Vista panel

  • There is no reset for the Installer Code on a ProA7 series panel.  You will need to get a valid code from the last dealer or replace the panel which may need the help of a local dealer to reprogram the new panel.
DSC PK5500 Keypad

DSC PowerSeries PC1616, PC1832, PC1864, HS2016, HS2032, HS2064

Default Installer Codes to try: 5555, 6321, 5010

To test if your Installer Code is valid

  • From your keypad enter *8 [Installer Code].  The default Installer Code is 5555. 
  • If correct the red lock light will come on.  If nothing or a long beep then the code entered is incorrect and changed by a dealer.
  • If correct press to exit Program Mode.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code

  • The only way to change the Installer Code if unknown is to default the panel which erases all zone configuration.  This should be handled by a local dealer since its pretty involved (and expensive) reprogramming the alarm panel.

Interlogix/GE NetworX NX-4V2, NX-6V2, NX-8V2, NX-8E

Default Installer Codes to try: 9713, 6321, 4321

To test if your Installer Code is valid

  • From your keypad enter *8 [Installer Code].  Try each default Installer Code above.
  • If correct the Service LED will flash and the five function LEDS will illuminate steady.  If nothing or a long beep then the code entered is incorrect and changed by a dealer.
  • If correct press EXIT to leave Program Mode.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code

  • There is no reset for the Installer Code on a NetworX panel.  You will need to get a valid code from the last dealer or replace the panel which may need the help of a local dealer to reprogram the new panel.

Interlogix Simon XT Alarm System

Interlogix/GE SimonXT

Default Installer Codes to try: 4321, 6321, 7913

To test if your Installer Code is valid

  • From your keypad press the Up or Down arrow until you reach System Programming then press OK
  • Try each default Installer Code above
  • If correct Access Codes will display on the scroll down menu.  If nothing or display returns to the Home screen then the code entered is incorrect and changed by a dealer.
  • If correct press STATUS several times to leave Program Mode.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code

  • The only way to change the Installer Code if unknown is to default the panel which erases all zone configuration.  This should be handled by a local dealer since its pretty involved (and expensive) reprogramming the alarm panel.

Interlogix/GE Concord 4

Default Installer Codes to try: 4321, 6321, 7913

To test if your Installer Code is valid

  • From your keypad enter 8 [Installer Code] + 00.  Try each default Installer Code above.
  • If correct the keypad will display System Programming  If nothing or a long beep then the code entered is incorrect and changed by a dealer.
  • If correct press the A or B keys until Exit Programming appears then press #. Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code

  • There is no reset for the Installer Code on a Concord 4 panel.  You will need to get a valid code from the last dealer or replace the panel which may need the help of a local dealer to reprogram the new panel.

Qolsys IQ Panel 2 Plus

Qolsys IQ 2, 2+, 4, Hub

Default Installer Codes to try: 1111, 2222, 6321

To test if your Installer Code is valid

  • Start from the home screen of the IQ Panel.

  • Press the small grey bar at the top or swipe down on the display.

  • Select Settings then Advanced Settings

  • Enter your Installer Code using codes above

  • If Installation appears as a menu item (top left) then the Installer Code is valid.

  • To exit Programming press the Home button.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code

  • There is no reset for the Installer Code on a Qolsys panel.  In most cases we can reset the Installer Code back to 1111 remotely once we register your Qolsys panel with Alarm.com.

2GIG Wireless Home Security Alarm System - 2GIG Control Panel

2GIG GC2, GC2e

Default Installer Codes to try: 1561, 6321

To test if your Installer Code is valid

  • Start from the Home screen of the GC2

  • Press Security, Menu, Toolbox

  • Press the Right Arrow key and select Installer Toolbox
  • Enter your Installer Code using codes above
  • If System Configuration appears as a menu item then the Installer Code is valid.

  • To exit Programming press End then Exit.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code

  • In most cases however we can reset the Installer Code back to 1561 remotely once we register your 2GIG panel with Alarm.com.
  • The other option is to default (reset) your 2GIG panel back to factory settings.  This can be expensive and/or time consuming reprogramming the system from scratch.

2GIG GC3, GC3e

Default Installer Codes to try: 1561, 6321

To test if your Installer Code is valid

  • Start from the Home screen of the GC3

  • Press System Settings

  • Enter your Installer Code using codes above
  • Press Installer Toolbox
  • If System Configuration appears as a menu item then the Installer Code is valid.

  • To exit Programming press End then Exit.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code

  • In most cases we can reset the Installer Code back to 1561 remotely once we register your 2GIG panel with Alarm.com.
  • The other option is to default (reset) your 2GIG panel back to factory settings.  This can be expensive and/or time consuming reprogramming the system from scratch.

2GIG Edge

Default Installer Codes to try: 1561, 6321

To test if your Installer Code is valid

  • Start from the Home screen of the Edge panel

  • Press the Gear icon on the bottom right corner of the screen

  • Enter your Installer Code using codes above
  • Scroll to the bottom and select Installer Toolbox
  • If Panel Programming appears as a menu item then the Installer Code is valid.

  • To exit Programming press the Back button until you get back to the HOME screen.  Be careful to not make any inadvertant changes while in Program Mode.

To reset the Installer Code

  • In most cases we can reset the Installer Code back to 1561 remotely once we register your 2GIG panel with Alarm.com

Situs sbobet resmi terpercaya. Daftar situs slot online gacor resmi terbaik. Agen situs judi bola resmi terpercaya. Situs idn poker online resmi. Agen situs idn poker online resmi terpercaya. Situs idn poker terpercaya.

situs idn poker terbesar di Indonesia.

List website idn poker terbaik.

Permainan judi slot online terbaik

slot hoki terpercaya