Finding The MAC and CRC or IMEI Communication ID Number For My Alarm Panel

Honeywell Lyric Controller (LCP500-L)

  • Press Home
  • Press Security
  • Press Tools
  • Enter your Installer Code (default is 4112 unless changed)
  • Press Program
  • Press Comm Diagnostic
  • Press the Down Arrow once and press Communication ID Numbers
  • The MAC and CRC numbers for the panel (WIFI) as well as cellular module (if installed) will be displayed
  • Press the Back Arrow until you reach the main screen or press Home to exit
honeywell lyric security system controller

Honeywell Lynx Touch L7000

  • Press Home
  • Press Security
  • Press More
  • Press Tools
  • Enter your Installer Code (default is 4112 unless changed)
  • Press Program
  • Press Comm Diagnostic
  • Press the Down Arrow once and press Communication ID Numbers
  • The MAC and CRC numbers for the panel (WIFI) as well as cellular module (if installed) will be displayed
  • Press the Back Arrow until you reach the main screen or press Home to exit

Honeywell Lynx Touch L5210

  • Press Home
  • Press Security
  • Press More
  • Press Tools
  • Enter your Installer Code (default is 4112 unless changed)
  • Press Program
  • Press Comm Diagnostic
  • Press the Down Arrow once and press Communication ID Numbers
  • The MAC and CRC numbers for the panel (WIFI) as well as cellular module (if installed) will be displayed
  • Press the Back Arrow until you reach the main screen or press Home to exit
Honeywell Lynx Touch L5210 Wireless Alarm System

Honeywell Lynx Plus L3000

  • Open the front cover of your L3000 panel
  • Your green cellular card will be on the right side of the back plate.
  • The MAC (12 characters) and CRC (4 characters) address will be shown on a white tag on the card
  • Will start with 00D02D or B82CA0
Honeywell Lynx Plus L3000 Wireless Alarm System

Qolsys IQ Panel 2 / 2+

  • Press Home
  • Swipe down or press grey bar at top of screen
  • Press Settings
  • Press Advanced Settings
  • Press System Tests
  • Press Cellular Test
  • The IMEI number will be shown on the screen (right side)
  • Press Home to exit
Qolsys-IQ-Panel-2

2GIG GC2

  • Press the 2GIG icon on the bottom right of screen
  • Enter your Installer Code (default is 1561)
  • Press Radio Status
  • The IMEI will be displayed as Serial Number which is 15 digits long
  • Press Home to exit

If you don’t know your Installer Code, open the front panel of the GC2 and copy the number from the paper tag on the cellular communicator (15 digits)

2GIG GC2 Wireless Security System

2GIG GC3

  • Press System Settings
  • Enter your Installer Code (default is 1561)
  • Press Cell Radio Swap
  • Press Radio Test
  • The IMEI will be displayed as Serial Number which is 15 digits long
  • Press Home to exit

If you don’t know your Installer Code, power your GC3 down (unplug interior battery too!) and pop out the cellular communicator from the side of the panel.  The IMEI will be shown on the paper tag on the cell module listed as ADC number (15 digits long).  Pop communicator module back in place and power the panel back up. Make sure to reconnect battery.

2GIG GC3 Wireless Security System

Interlogix Simon XT

  • Open the front of your panel to see the interior cellular communicator board
  • The IMEI will be shown on the paper tag on the cell module and is 15 digits long
GE Simon XT

Interlogix Simon XTi

  • Press the gear icon on lower right side of screen
  • Press the down arrow and scroll down to Programming
  • Enter your Installer Code (default is 4321) and press OK
  • Press Interactive Services
  • Press Module Status
  • The  abbreviated IMEI will be displayed as Serial Number which is 10 digits long
  • Press Close to exit

If you don’t know your Installer Code, open the front of your panel to see the interior cellular communicator board.  The IMEI will be shown on the paper tag on the cell module listed as ADC number.

Interlogix Simon XTi All-In-One Wireless Alarm System

Interlogix Simon XTi-5

  • From the Home screen press Settings
  • Press Programming
  • Enter your Installer Code (default is 4321) and press OK
  • Press Interactive Services
  • Press Module Status
  • The  abbreviated IMEI will be displayed as Serial Number which is 10 digits long
  • Press Close to exit

If you don’t know your Installer Code, open the front of your panel to see the interior cellular communicator board.  The IMEI will be shown on the paper tag on the cell module listed as ADC number.

Interlogix Simon XTi-5

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Help Us Stop SPAM!